Facade access system:

Jibs

Portable Aluminum Alloy jibs are ideally suited for low-rise buildings in India especially considering our very low labor costs. Constructed out of special Aluminum Alloy. Light in weight but strong. Provided with Pivoting Safety stops to avoid accidental sliding back. Jibs can be anchored at various points ane levels around perimeter of the building. Easily transferred from one location to another by two window cleaners They can be re-erected in matter of seconds Pair of Portable jibs is capable of carrying weight of Cradle plus 180 kg., which is two persons weighing 70 kg each plus 40 kg additional loads.

There are Two Type of Jibs:

1) Roof Mounted Jib
2) Parapet Mounted Jib


Roof Mounted Jib:
Easily erected by sliding them into portable tops fixed on the Roof. Front struts of the jibs are constructed out of all section to make jibs lightweight. Bottom part f the struts is lined with wood. Provided with Safety Harness Anchoring Point. Standard height is 1200 mm. But can be suited as per building required. Dimension from Anchorage of Cradle to Centre Point of strut should not exceed 1400 mm for power winches

Parapet Mounted Jib:
Easily erected by pushing them in top and bottom hoop supports permanetly fixed on the parapet walls. Provided with Safety harness Anchoring Point.. Dimension from Anchorage of Cradle to Centre Point of strut should not exceed 1300 mm for manual winches or 1175 mm for power winches.

Cradles

There are Three Types of Cradles:

1) Solo Power Cradle
2) Two Man Power Cradle (Standard Cradle)
3) Articulated Power Cradle



Solo Power Cradle
Capacity : One man / One Operative

Safe Working Load : 120 Kg..

Power Requirement : 3 Phase, 440V, 50 Hz, 16AMP

Size of Cradle : Dia. 8mm, 6 x 19 Galvanized, Overall dimension of 650 mm long, Width Over rails 635 mm

Traction Hoist : Compact-S Traction-Hoist of capacity 400kg

Brakes : 1 No. of capacity 500 kg. each

Motor : Winches fitted with 0.55 kw Motor, 220-240V, 1 phase 50 Hz supply, IP-55 construction

Climbing speed ; 8m/ min


Two Man Power Cradle (Standard Cradle):
Capacity : Two Man

Safe working load : 240kg

Power Requirement : Plug and Socket outlet, 5-pin, 415v, 3-phase, 50Hz, 20 Amps

Cable Required : PVC Copper flexible cable 6 core x 2.5 Sq mm. length as per size condition

Size of Cradle : Over all dimension of 2300 mm long, Width over rails 700 mm

Construction : Constructed out of MS-box section. The flooring is Aluminium chequered Plate with to board, Fitted with PVC covered foam buffering & Rubber Rollers. Provided with two no. slewing and two no. fixed position Castors.

Traction Hoist : Two number Power Winches of capacity of more than 400 Kg each.

Motors : Winches fitted with 0.75K w Motor, 415V, 3-Phase 50 Hz supply
Climbibg Speed : 8.5 M/Min.





Monorails

Permanent Runways offer excellent access solution to many complex building facades. Anchored to the facade of the building with Hot Dip Galvanized supports. Supports can be supplied in advance for fixing by Civil Contractors.

Traverse roller is supplied on the track for traverse movement. The roller is removable. Provided with end stops as a safety precaution. Bends even Up to 90 degrees are possible. Track is capable of carrying 5kn load at any given point. Roof is free for any other use. The clients shall provide access for the instalation, if any. This system can be installed as soffit mounting or face mounting system.



There are Two Types of Tracks :
1) Alumiminum Alloy Track C-130
2) Climbing Track NP-01



Alumiminum Alloy Track C-130

  • Aluminum Alloy Track from Alloy 6351 of dimensions 133 x 52mm.
  • Anchored to the Facade of the building with Hot Dip galvanized brackets.
  • Traverse roller SS components and hardware is supplied on the track for traverse movement. The roller is removable.
  • Provided with end stops as a safety precaution.
  • It is necessary to provide one open window near the track for maintenance C-130 Track.
  • Track is capable of carrying weight of Two Man Power Cradle.
  • The clients shall provide access for the installation, if any.


  • Climbing Track NP-01 :
  • Aluminum Alloy Sturdy runway of dimensions 139 x 46 MM.
  • Anchored to the Facade of the building with Hot Dip galvanized supports.
  • Supports can be supplied in advance for fixing by Civil Contractors.
  • Motorized Traverse rollers are supplied on the track for traverse movement.




  • Trolleys

    Track Trolleys or Building maintence units (BMU) are suspended access equipment intended to permanently installed and dedicated to a specific building or structure. BMU is a versatile system with numerous functions built into it for catering to difficult access requirements.

    The Trolley is designed to support Two Persons & Power Cradle. The trolley will be of very high profile and the Cradle can be rigged from the Terrace. Entry, Parking and Storage of the Cradle can be on the roof. The trolley is designed as per En1808 Standards.



    There are Two Types of Trolleys :
    1) Trackless Trolley
    2) Track Trolley



    Trackless Trolley
    The trolley is designed to support Two pesons & Power Cradle. The Machine is constructed from structural steel with an anti corrosin treatment, painted finish and use of Stainless Steel components wherever required. The trolley will be of four wheel configuration and a guide track roller is provided in the front which is lnked with a guide track to be fixed by us in the R.C.C parapet wall. The traverse movement will be by an electric motor operable from the Cradle when the Cradle is at its highest level. The trolley will have power slewing arrangement. Operators can slew it from the roof level.


    Track Trolley
    The Trolley will be mounted on hot dip galvanized steel twin horizontal I-Beam or H-Beam tracks munted on concrete pedestals or steel supports which are connected to building structure. The power required for these motors will be 3Phase, 440V, 50Hz AC power supply. The frequency of pedestals is dependent on trolley size, load carrying capacity & track gauge. Complete trolley is fabricated from MS pipes & plates sections & is fully welded in construction. The trolley is designed as per En1808-1998. All the drive motors & slew motos shall have independent brake unit inbuilt in geared motor.




    Roof Rigs

    MS galvanized Counter Weight Rigs mounted on the terrace floor. This system is mobile, no equipment is installed anywhere. This equipment is manufactured in Structural MS material. Our systems are in operation on the terraces of many buildings. This is a strong system designed to withsand very rough use and open climate conditions. Quality and durability of the system is assured.


    The counter weights are made up of MS blocks. Each approximately weighs 20 to 30 Kg. Gross weight of the each system will be approximately 1000 kg.

    We offer 'ONE Year' warranty. From our experience we can confidently assure you that the system will be operational for many years without giving you any kind of trouble.

    The system requires 2.75m of clear space from parapet inner side, along the periphery of the building onthe terrace and it give 1.5 m outage from the centre of the Rig.

    The system is custom designed for each building. It can be designed to clear the parapet comfortably. If the client wants to park the cradle on terrace, a opening has to be provided in the Parapet. Opening measurements depend on the type of system the client wants to utilize.






    DUOS BRAIN MANAGEMENT SUPPORT SERVICES


    A-40, Pochanpur Extension ,
    Gali No.-1,Village:-Pochanpur,
    Near Sector-23, Dwarka , New Delhi -110077

    Tel : 011-65857768 ,9810124655 , 9810220105
    Email : dbmssindia@yahoo.com . Website : www.dbmss.in

    Enquiry

    Name :
    Email :
    Phone :
    Message :